Electric sprayer, charging sprayer, knapsack-type high-pressure disinfection pesticide watering can, new spraying agricultural
PW-03 Electric sprayer
Lithium battery agricultural sprayer
Power: 25W
Weight: 3KG
Material: PP
Battery capacity: 12V 4AH/5AH/7.5AH
Use time: 2 hours
Capacity: 10L
High quality 1.2M rubber hose
Precautions and storage and maintenance
1. After fully charged, first disconnect the charger from the mains, and then unplug the DC plug.
2. Newly purchased products or long-term shelving is not used, generally recharge once every 2 months.
3. After each use, no matter whether it has electricity or not, it should be recharged and stored.
4. When the machine is charged, the charging time limit is 5-8 hours.
5. Please pay attention to the following matters when spraying:
1) Tighten the joints of all parts before operation.
(2) Wash hands and face after each use.
6. The supplied charger cannot be replaced at will or used on other charging equipment to avoid damage caused by wrong connection of the output positive and negative poles.
7. In order to prevent potential safety hazards, non-professionals are not allowed to disassemble the charger of this machine.
8. After maintenance, it should be placed in a dry and ventilated place, away from fire and sunlight.
Prohibited matters:
1. It is strictly forbidden to immerse or clean the base or the whole machine in the water.
2. Description: The operator should wear masks, gloves and other protective equipment during operation; special working fluids are prohibited. When handling pesticides, follow the safety instructions provided by the pesticide manufacturer.
Precautions for the use of the charger:
1 The charger must be kept away from rain and moisture. If water enters, it will be damaged
2 Do not use this charger to charge other batteries. If it does not match, it may cause a fire.
3 The charger should be kept clean, if dirt accumulates, it is easy to cause electric shock.
4 Before use, you must check the wires and plugs. If they are damaged, do not use them again. Do not disassemble without authorization. It can only be repaired by a professional engineer.
5 Do not place the charger on flammable products during charging, nor use it in a flammable environment. It will generate heat when charging, and it may cause a fire under the above conditions.
6 The voltage of the battery used must be consistent with the voltage indicated by the charger.
7 When repairing or cleaning, the plug must be unplugged
8 When the charger is not in use, please unplug it
9 Do not touch the non-insulated output connection part to prevent electric shock
){kind=link}
){kind=link}